namespace CowainHmi
{
    partial class FrmMain
    {
        /// <summary>
        /// 必需的设计器变量。
        /// </summary>
        private System.ComponentModel.IContainer components = null;

        /// <summary>
        /// 清理所有正在使用的资源。
        /// </summary>
        /// <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
        protected override void Dispose(bool disposing)
        {
            if (disposing && (components != null))
            {
                components.Dispose();
            }
            base.Dispose(disposing);
        }

        #region Windows 窗体设计器生成的代码

        /// <summary>
        /// 设计器支持所需的方法 - 不要修改
        /// 使用代码编辑器修改此方法的内容。
        /// </summary>
        private void InitializeComponent()
        {
            this.components = new System.ComponentModel.Container();
            PCHMI.PC_DATETIME_ADDR pC_DATETIME_ADDR1 = new PCHMI.PC_DATETIME_ADDR();
            PCHMI.STARTGIF startgif1 = new PCHMI.STARTGIF();
            PCHMI.KEYBEEP keybeep1 = new PCHMI.KEYBEEP();
            PCHMI.TLOG tlog1 = new PCHMI.TLOG();
            PCHMI.PAGE_CONFIG pagE_CONFIG1 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG2 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG3 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG4 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG5 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG6 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG7 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG8 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG9 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG10 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG11 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG12 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG13 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG14 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG15 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG16 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG17 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG18 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG19 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG20 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG21 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG22 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG23 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG24 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG25 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG26 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG27 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG28 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG29 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG30 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG31 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG32 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG33 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG34 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG35 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG36 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG37 = new PCHMI.PAGE_CONFIG();
            PCHMI.PAGE_CONFIG pagE_CONFIG38 = new PCHMI.PAGE_CONFIG();
            PCHMI.WINDOW_SIZE windoW_SIZE1 = new PCHMI.WINDOW_SIZE();
            PCHMI.limits limits1 = new PCHMI.limits();
            PCHMI.PF pf1 = new PCHMI.PF();
            System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(FrmMain));
            this.config1 = new PCHMI.CONFIG();
            this.timer1 = new System.Windows.Forms.Timer(this.components);
            this.配方1 = new PCHMI.配方();
            this.SuspendLayout();
            // 
            // config1
            // 
            this.config1.MAIN_HMI_IP = "";
            this.config1.MODBUS服务器配置 = null;
            pC_DATETIME_ADDR1.PLC = ((uint)(0u));
            pC_DATETIME_ADDR1.地址 = "U1000";
            this.config1.PC时间保存地址 = new PCHMI.PC_DATETIME_ADDR[] {
        pC_DATETIME_ADDR1};
            this.config1.主页显示到上次位置 = false;
            this.config1.允许同时运行多个程序 = false;
            this.config1.功能权限分配 = null;
            startgif1.动画图片 = null;
            startgif1.动画时间 = 1000;
            startgif1.登录界面 = "";
            this.config1.开机界面 = startgif1;
            this.config1.快速登录注销时间 = ((uint)(60u));
            keybeep1.WAV文件路径 = "";
            keybeep1.启用 = false;
            keybeep1.时长 = 120;
            keybeep1.频率 = 2000;
            this.config1.按键音 = keybeep1;
            tlog1.日志保存目录 = "D:\\TextLog";
            this.config1.操作日志 = tlog1;
            this.config1.数据库连接 = null;
            this.config1.数据路径 = "D:\\";
            pagE_CONFIG1.PLC = ((uint)(0u));
            pagE_CONFIG1.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG1.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG1.画面名称 = "S1生产画面";
            pagE_CONFIG1.画面显示监控值 = ((long)(100));
            pagE_CONFIG1.监控地址 = "U200";
            pagE_CONFIG2.PLC = ((uint)(0u));
            pagE_CONFIG2.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG2.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG2.画面名称 = "S1流程信息";
            pagE_CONFIG2.画面显示监控值 = ((long)(101));
            pagE_CONFIG2.监控地址 = "U200";
            pagE_CONFIG3.PLC = ((uint)(0u));
            pagE_CONFIG3.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG3.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG3.画面名称 = "S1产量统计";
            pagE_CONFIG3.画面显示监控值 = ((long)(102));
            pagE_CONFIG3.监控地址 = "U200";
            pagE_CONFIG4.PLC = ((uint)(0u));
            pagE_CONFIG4.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG4.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG4.画面名称 = "S1Mes信息";
            pagE_CONFIG4.画面显示监控值 = ((long)(103));
            pagE_CONFIG4.监控地址 = "U200";
            pagE_CONFIG5.PLC = ((uint)(0u));
            pagE_CONFIG5.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG5.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG5.画面名称 = "S1配方工艺";
            pagE_CONFIG5.画面显示监控值 = ((long)(104));
            pagE_CONFIG5.监控地址 = "U200";
            pagE_CONFIG6.PLC = ((uint)(0u));
            pagE_CONFIG6.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG6.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG6.画面名称 = "S1报警记录";
            pagE_CONFIG6.画面显示监控值 = ((long)(105));
            pagE_CONFIG6.监控地址 = "U200";
            pagE_CONFIG7.PLC = ((uint)(0u));
            pagE_CONFIG7.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG7.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG7.画面名称 = "S1设备调试";
            pagE_CONFIG7.画面显示监控值 = ((long)(106));
            pagE_CONFIG7.监控地址 = "U200";
            pagE_CONFIG8.PLC = ((uint)(0u));
            pagE_CONFIG8.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG8.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG8.画面名称 = "S1设备IO";
            pagE_CONFIG8.画面显示监控值 = ((long)(107));
            pagE_CONFIG8.监控地址 = "U200";
            pagE_CONFIG9.PLC = ((uint)(0u));
            pagE_CONFIG9.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG9.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG9.画面名称 = "S1工厂设置";
            pagE_CONFIG9.画面显示监控值 = ((long)(108));
            pagE_CONFIG9.监控地址 = "U200";
            pagE_CONFIG10.PLC = ((uint)(0u));
            pagE_CONFIG10.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG10.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG10.画面名称 = "S1网络诊断";
            pagE_CONFIG10.画面显示监控值 = ((long)(109));
            pagE_CONFIG10.监控地址 = "U200";
            pagE_CONFIG11.PLC = ((uint)(0u));
            pagE_CONFIG11.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG11.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG11.画面名称 = "S1调度信号";
            pagE_CONFIG11.画面显示监控值 = ((long)(110));
            pagE_CONFIG11.监控地址 = "U200";
            pagE_CONFIG12.PLC = ((uint)(0u));
            pagE_CONFIG12.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG12.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG12.画面名称 = "S1数据记录";
            pagE_CONFIG12.画面显示监控值 = ((long)(111));
            pagE_CONFIG12.监控地址 = "U200";
            pagE_CONFIG13.PLC = ((uint)(0u));
            pagE_CONFIG13.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG13.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG13.画面名称 = "S1拧紧枪";
            pagE_CONFIG13.画面显示监控值 = ((long)(112));
            pagE_CONFIG13.监控地址 = "U200";
            pagE_CONFIG14.PLC = ((uint)(0u));
            pagE_CONFIG14.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG14.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG14.画面名称 = "S1RFID";
            pagE_CONFIG14.画面显示监控值 = ((long)(113));
            pagE_CONFIG14.监控地址 = "U200";
            pagE_CONFIG15.PLC = ((uint)(0u));
            pagE_CONFIG15.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG15.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG15.画面名称 = "S1助力臂";
            pagE_CONFIG15.画面显示监控值 = ((long)(114));
            pagE_CONFIG15.监控地址 = "U200";
            pagE_CONFIG16.PLC = ((uint)(0u));
            pagE_CONFIG16.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG16.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG16.画面名称 = "S1线体电机";
            pagE_CONFIG16.画面显示监控值 = ((long)(115));
            pagE_CONFIG16.监控地址 = "U200";
            pagE_CONFIG17.PLC = ((uint)(0u));
            pagE_CONFIG17.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG17.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG17.画面名称 = "S1Robot";
            pagE_CONFIG17.画面显示监控值 = ((long)(116));
            pagE_CONFIG17.监控地址 = "U200";
            pagE_CONFIG18.PLC = ((uint)(0u));
            pagE_CONFIG18.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG18.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG18.画面名称 = "S1ATEQ气密仪";
            pagE_CONFIG18.画面显示监控值 = ((long)(117));
            pagE_CONFIG18.监控地址 = "U200";
            pagE_CONFIG19.PLC = ((uint)(0u));
            pagE_CONFIG19.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG19.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG19.画面名称 = "S1视觉";
            pagE_CONFIG19.画面显示监控值 = ((long)(118));
            pagE_CONFIG19.监控地址 = "U200";
            pagE_CONFIG20.PLC = ((uint)(0u));
            pagE_CONFIG20.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG20.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG20.画面名称 = "S1众为兴板卡";
            pagE_CONFIG20.画面显示监控值 = ((long)(119));
            pagE_CONFIG20.监控地址 = "U200";
            pagE_CONFIG21.PLC = ((uint)(0u));
            pagE_CONFIG21.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG21.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG21.画面名称 = "S1换模寿命";
            pagE_CONFIG21.画面显示监控值 = ((long)(120));
            pagE_CONFIG21.监控地址 = "U200";
            pagE_CONFIG22.PLC = ((uint)(0u));
            pagE_CONFIG22.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG22.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG22.画面名称 = "S1测试";
            pagE_CONFIG22.画面显示监控值 = ((long)(121));
            pagE_CONFIG22.监控地址 = "U200";
            pagE_CONFIG23.PLC = ((uint)(0u));
            pagE_CONFIG23.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG23.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG23.画面名称 = "S1电机信号";
            pagE_CONFIG23.画面显示监控值 = ((long)(122));
            pagE_CONFIG23.监控地址 = "U200";
            pagE_CONFIG24.PLC = ((uint)(0u));
            pagE_CONFIG24.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG24.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG24.画面名称 = "S1安全总览";
            pagE_CONFIG24.画面显示监控值 = ((long)(123));
            pagE_CONFIG24.监控地址 = "U200";
            pagE_CONFIG25.PLC = ((uint)(0u));
            pagE_CONFIG25.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG25.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG25.画面名称 = "S1局部图览1";
            pagE_CONFIG25.画面显示监控值 = ((long)(124));
            pagE_CONFIG25.监控地址 = "U200";
            pagE_CONFIG26.PLC = ((uint)(0u));
            pagE_CONFIG26.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG26.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG26.画面名称 = "S1加热机";
            pagE_CONFIG26.画面显示监控值 = ((long)(125));
            pagE_CONFIG26.监控地址 = "U200";
            pagE_CONFIG27.PLC = ((uint)(0u));
            pagE_CONFIG27.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG27.显示位置 = new System.Drawing.Point(0, 62);
            pagE_CONFIG27.画面名称 = "S1砺星压机";
            pagE_CONFIG27.画面显示监控值 = ((long)(126));
            pagE_CONFIG27.监控地址 = "U200";
            pagE_CONFIG28.PLC = ((uint)(0u));
            pagE_CONFIG28.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG28.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG28.画面名称 = "S1备用工位";
            pagE_CONFIG28.画面显示监控值 = ((long)(120));
            pagE_CONFIG28.监控地址 = "U200";
            pagE_CONFIG29.PLC = ((uint)(0u));
            pagE_CONFIG29.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG29.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG29.画面名称 = "S2生产画面";
            pagE_CONFIG29.画面显示监控值 = ((long)(200));
            pagE_CONFIG29.监控地址 = "U200";
            pagE_CONFIG30.PLC = ((uint)(0u));
            pagE_CONFIG30.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG30.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG30.画面名称 = "S2流程信息";
            pagE_CONFIG30.画面显示监控值 = ((long)(201));
            pagE_CONFIG30.监控地址 = "U200";
            pagE_CONFIG31.PLC = ((uint)(0u));
            pagE_CONFIG31.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG31.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG31.画面名称 = "S2产量统计";
            pagE_CONFIG31.画面显示监控值 = ((long)(202));
            pagE_CONFIG31.监控地址 = "U200";
            pagE_CONFIG32.PLC = ((uint)(0u));
            pagE_CONFIG32.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG32.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG32.画面名称 = "S2Mes信息";
            pagE_CONFIG32.画面显示监控值 = ((long)(203));
            pagE_CONFIG32.监控地址 = "U200";
            pagE_CONFIG33.PLC = ((uint)(0u));
            pagE_CONFIG33.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG33.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG33.画面名称 = "S2配方工艺";
            pagE_CONFIG33.画面显示监控值 = ((long)(204));
            pagE_CONFIG33.监控地址 = "U200";
            pagE_CONFIG34.PLC = ((uint)(0u));
            pagE_CONFIG34.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG34.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG34.画面名称 = "S2设备调试";
            pagE_CONFIG34.画面显示监控值 = ((long)(206));
            pagE_CONFIG34.监控地址 = "U200";
            pagE_CONFIG35.PLC = ((uint)(0u));
            pagE_CONFIG35.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG35.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG35.画面名称 = "S2设备IO";
            pagE_CONFIG35.画面显示监控值 = ((long)(207));
            pagE_CONFIG35.监控地址 = "U200";
            pagE_CONFIG36.PLC = ((uint)(0u));
            pagE_CONFIG36.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG36.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG36.画面名称 = "S2工厂设置";
            pagE_CONFIG36.画面显示监控值 = ((long)(208));
            pagE_CONFIG36.监控地址 = "U200";
            pagE_CONFIG37.PLC = ((uint)(0u));
            pagE_CONFIG37.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG37.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG37.画面名称 = "S2网络诊断";
            pagE_CONFIG37.画面显示监控值 = ((long)(209));
            pagE_CONFIG37.监控地址 = "U200";
            pagE_CONFIG38.PLC = ((uint)(0u));
            pagE_CONFIG38.地址类型 = PCHMI.PAGE_CONFIG.DatType.UINT16;
            pagE_CONFIG38.显示位置 = new System.Drawing.Point(0, 60);
            pagE_CONFIG38.画面名称 = "S1扫码枪";
            pagE_CONFIG38.画面显示监控值 = ((long)(128));
            pagE_CONFIG38.监控地址 = "U200";
            this.config1.画面 = new PCHMI.PAGE_CONFIG[] {
        pagE_CONFIG1,
        pagE_CONFIG2,
        pagE_CONFIG3,
        pagE_CONFIG4,
        pagE_CONFIG5,
        pagE_CONFIG6,
        pagE_CONFIG7,
        pagE_CONFIG8,
        pagE_CONFIG9,
        pagE_CONFIG10,
        pagE_CONFIG11,
        pagE_CONFIG12,
        pagE_CONFIG13,
        pagE_CONFIG14,
        pagE_CONFIG15,
        pagE_CONFIG16,
        pagE_CONFIG17,
        pagE_CONFIG18,
        pagE_CONFIG19,
        pagE_CONFIG20,
        pagE_CONFIG21,
        pagE_CONFIG22,
        pagE_CONFIG23,
        pagE_CONFIG24,
        pagE_CONFIG25,
        pagE_CONFIG26,
        pagE_CONFIG27,
        pagE_CONFIG28,
        pagE_CONFIG29,
        pagE_CONFIG30,
        pagE_CONFIG31,
        pagE_CONFIG32,
        pagE_CONFIG33,
        pagE_CONFIG34,
        pagE_CONFIG35,
        pagE_CONFIG36,
        pagE_CONFIG37,
        pagE_CONFIG38};
            this.config1.登录方式 = PCHMI.CONFIG.LOGType.用户登录;
            windoW_SIZE1.软键盘 = PCHMI.WINDOW_SIZE.SIZE.小;
            this.config1.窗口尺寸 = windoW_SIZE1;
            this.config1.等比缩放 = false;
            limits1.PLC = ((uint)(0u));
            limits1.地址 = "";
            limits1.限制类型 = PCHMI.limits.LType.无效;
            this.config1.运行限制 = limits1;
            this.config1.通讯配置 = new string[] {
        "SIEMENS_S7;172.168.17.21;102;SLOT=1;JumpBit=DB2.2.0"};
            this.config1.通讯配置文件名 = "";
            this.config1.随机数保存地址 = null;
            // 
            // timer1
            // 
            this.timer1.Interval = 1000;
            this.timer1.Tick += new System.EventHandler(this.timer1_Tick);
            // 
            // 配方1
            // 
            pf1.HDADDR = "U2000";
            pf1.PLC = ((uint)(0u));
            pf1.配方名长度 = 15;
            pf1.配方文件.Text = "S1配方";
            pf1.配方文件名 = "S1配方";
            this.配方1.配方编辑 = new PCHMI.PF[] {
        pf1};
            // 
            // FrmMain
            // 
            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 12F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.ClientSize = new System.Drawing.Size(1024, 768);
            this.ControlBox = false;
            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None;
            this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
            this.Margin = new System.Windows.Forms.Padding(2);
            this.MaximizeBox = false;
            this.MinimizeBox = false;
            this.Name = "FrmMain";
            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
            this.Tag = "OP3050";
            this.Text = "Form1";
            this.Load += new System.EventHandler(this.FrmMain_Load);
            this.ResumeLayout(false);

        }

        #endregion
        private PCHMI.CONFIG config1;
        private System.Windows.Forms.Timer timer1;
        private PCHMI.配方 配方1;
    }
}